Compressed Gas Regulator for Oxygen

A compressed gas regulator is a device that is used to control the flow of gases, such as oxygen, from a high-pressure cylinder or tank to a lower pressure system. The regulator is typically installed between the gas cylinder and the point of use, and it is used to reduce the pressure of the gas to a safe and consistent level. This is important because the pressure of gases in high-pressure cylinders can be very dangerous if not properly controlled.

Compressed gas regulators are typically designed to work with a specific type of gas, such as oxygen, and they are equipped with a pressure gauge that indicates the pressure of the gas at the point of use. The regulator is equipped with a valve that can be adjusted to control the flow of gas through the regulator, and it is typically equipped with a pressure-reducing element that reduces the pressure of the gas to a safe and consistent level.

Compressed gas regulators are an important safety device for welding. They are typically made of durable materials such as brass or stainless steel and are designed to withstand high pressures and harsh environments.

A self-contained mechanical control device used to maintain the pressure of Oxygen discharged from the bottle.

Pressure: 0.25~0.35MPa

Pay attention to the following 2 points during the preheating process:

1. The distance between the gas bottle and the oxygen cylinder is not less than 5m, and the distance between the gas cylinder and the flame is not less than 10m.

2. During the welding process, it is forbidden to stamp on the air pipe to ensure safe and smooth of gas. Wire cable, air pipe should be away from flame and high temperature operation area.

Thermit Welding Video

Content that might be helpful to you!

What is thermite welding?
How is Thermite Welding performed on railroads?